Toner Remaining; T/C Change - Oki MC160 User Manual

TONER REMAINING

A general estimate of the amount of toner remaining in the toner cartridges
can be viewed.
If the E
described above is displayed, the configuration page will be printed.

T/C CHANGE

REPLACE MODE
EJECT MODE
Checking the Machine Status and Settings
key is held down for at least 2 seconds while the screen
NTER
Switches the machine to the REPLACE MODE.
This mode is used when replacing a toner car-
tridge.
For details on replacing a toner cartridge, refer
to "Replacing a Toner Cartridge" on page 7-4.
Switches the machine to the EJECT MODE.
This mode is used when replacing all toner car-
tridges at the same time.
For details on replacing all toner cartridges,
refer to "Replacing All Toner Cartridges at the
Same Time" on page 7-10.
To return to normal operation mode from
REPLACE MODE, press the S
key.
To return to normal operation mode from
EJECT MODE, press the S
key.
/R
TOP ESET
/R
TOP ESET
2-15