Setting A Copy Function - Oki MC160 User Manual

4
To print color copies, press the S
copies, press the S
Scanning of the document begins.
In order to perform duplex (double-sided) copying or collated (Sort)
copying with 2in1 copying, specify the necessary settings before
performing step 4. For details, refer to "Setting Duplex (Dou-
ble-Sided) Copying" on page 5-11 and "Setting Collated (Sort)
Copying" on page 5-13.
5
When
NEXT PAGE?
document page on the original glass, and then press the E
6
Repeat step 5 until all document pages have been scanned.
If
2in1
(four document pages if duplex (double-sided) copying was set) have
been scanned.
7
After all document pages have been scanned, press the S
key or the S

Setting a Copy Function

ID card copying, repeat copying and poster copying can be set.
If a copy function other than
ing, collated (Sort) copying and duplex (double-sided) copying cannot
be set. In addition, the zoom ratio is automatically set (and cannot be
changed).
ID card copying, repeat copying and poster copying can only be per-
formed with the original glass. Position the document pages to be
scanned so that they are aligned in the upper-left corner of the original
glass. Since the image is printed 4 mm from the top and left side,
adjust the position of the document as necessary. For details on posi-
tioning the document on the original glass, refer to "Placing a docu-
ment on the original glass" on page 3-23.
Making Advanced Copies
-M
TART
appears in the message window, place the second
is set, printing automatically begins after two document pages
-M key to begin printing the remaining pages.
TART ONO
-C
TART OLOR
key.
ONO
NORMAL COPY
key. To print monochrome
NTER
-C
TART
has been set, 2in1 copy-
key.
OLOR
5-7