Oki MC160 User Manual page 245

This message...
OUTPUT TRAY FULL
REMOVE PAPER
OVER SEARCH TIME
PAPER EMPTY
LOAD PAPER (
PAPER SIZE ERROR
RESET PAPER (xxx)
PC CONNECTION FAILED
Process Caution -
IDC
PROCESS ERROR-xxx
CLEAR BY COVER
REMOVE ORIGINAL
IN ADFR
Status, Error, and Service Messages
means...
The output tray is
full of paper.
Communication with
the LDAP server
has timed out.
Tray 2 has run out
of paper.
2
xx)
The size of paper
being printed on is
different from the
size of paper speci-
fied in the printer
driver.
While data was
being sent in Scan
mode, the connec-
tion to the computer
was interrupted.
A process error
occurred in the
machine.
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
Do this...
Remove all paper from
the output tray.
Establish a connection
with the LDAP server
again.
Load media into the
tray.
Press the S key to
TART
cancel the caution.
To print on paper of the
size specified in the
printer driver, load
paper of the correct
size into the specified
tray, and then try per-
forming the print job
again.
Check the connection
with the computer and
the scanner driver sta-
tus, and then try send-
ing the data again.
Open and close the
scanner unit.
Place the document on
the original glass.
9-43