Nearest Airport Criteria - Garmin GTN 625 Pilot's Manual

15.4.3
Foreword
Nearest Airport Criteria defines the surface type and minimum runway
length used when determining the 25 nearest airports to display on the Nearest
Getting
Started
Airport Page. A minimum runway length and/or surface type may be entered to
Audio & prevent airports with small runways, or runways that do not have an appropriate
Xpdr Ctrl
surface, from being displayed. The default settings are "0 feet (or meters)" for
runway length and "any" for runway surface type.
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15-28

Nearest Airport Criteria

1. While viewing the System Setup page, touch the Nearest
Airport key.
Figure 15-38 Select Nearest Airport Criteria
2. Touch the Runway Surface key to display the options. Touch
the desired surface type.
Figure 15-39 Nearest Airport Runway Surface Type
3. Touch Minimum Runway Length to display the keypad
for selecting the minimum runway length. Select the desired
minimum runway length with the numeric keypad. A selection
of "0" will allow any length.
Garmin GTN 625/635/650 Pilot's Guide
Touch To Select
Runway Surface Type
Touch To Select Minimum
Runway Length
Touch to Select Any
Runway Surface
Touch to Select Hard
Runway Surfaces Only
Touch to Select Hard or
Soft Runway Surfaces
Touch to Select Water
Surfaces Only (Not Shown)
190-01004-03 Rev. K