Creating An Orbit Pattern - Garmin GTN 625 Pilot's Manual

4.2.4.4
Foreword
The Orbit SAR pattern is a fixed radius turn around the specified center
Getting
waypoint. Automatic waypoint sequencing will be suspended while flying the
Started
orbit pattern.
Audio &
Xpdr Ctrl
Com/Nav Selected Initial Wpt
Touch To Select SAR
Pattern Type
FPL
Touch To Select
Initial Turn Direction
Direct-To
Touch To Preview
Selected Pattern
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
4-20

Creating an Orbit Pattern

Touch To Select Radius
Touch To Load Selected Pattern
Figure 4-38 Search and Rescue Orbit Pattern Page
Figure 4-39 Orbit Search Pattern
1. Touch the SAR Pattern key and select Orbit as the pattern
type.
2. Touch the INIT Turn key to select between Left or Right as
the turn direction.
3. Touch the Radius key to open the keypad. Use the keypad
and Enter to select the radius of the orbit pattern.
4. Touch the Preview key to open a preview of the selected
pattern.
5. Touch the Load Pattern key to load selected pattern to the
active flight plan.
6. Or touch the Load PTRN & Activate key to load selected
pattern to the active flight plan and go direct-to the first
waypoint in the pattern.
Garmin GTN 625/635/650 Pilot's Guide
To The Active Flight Plan
Touch To Load
Selected Pattern To
The Active FPL And
Go Direct-To The First
Wpt In The Pattern
190-01004-03 Rev. K