Map Overlays - Garmin GTN 625 Pilot's Manual

• Map Detail lets you control the amount of information displayed at different
map ranges.
• Restore Defaults lets you start all over again with the default values for Map
User Fields.
NOTE: Changes made in the Map Menu take effect immediately on the
map display.
1. From the Home page, touch Map to reach the Map page, and
then touch the Menu key.
Map Overlay
Selections
2. Touch the key for the desired option to access its settings.
3. Touch the Back key to return to the Map page. Any changes
made will be retained until changed.
8.1.1

Map Overlays

Map Overlays are layers of information that are referenced to geographic
location and are overlayed on the base map. A green bar will appear below
the Map Overlay key text when the overlay is selected, except for Airways and
NEXRAD.
NOTE: Map overlay keys do not turn on or activate equipment necessary
for the overlay to function. Map overlay keys may remain available even
if the information necessary for the overlay is not available. For example:
the Radar overlay key is available even if the radar is turned off.
190-01004-03 Rev. K
Figure 8-3 Map Menu
Garmin GTN 625/635/650 Pilot's Guide
Touch To Edit Map Setup
Touch and Drag Finger To
Adjust Map Detail Level
Touch To Edit Map
User Fields (Corners)
Return Map User Fields To
Default Values
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
8-3