Garmin GTN 625 Pilot's Manual page 472

15.6
Foreword
The User Fields selection allows you to configure the data field type shown at
the right of the display when it is not occupied by the control for a transponder.
Getting
Started
The data shown in the field may be selected from a list after touching the desired
Audio &
field.
Xpdr Ctrl
NOTE: Data Field Types that use the term "Destination" refer to the final
Com/Nav
destination in the flight plan.
FPL
NOTE: ETE to Destination is not available when a procedure is loaded and
there are waypoints in the Enroute section of the flight plan.
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Selected Field
Nearest
Type
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15-36
User Fields
1. While viewing the System page, touch the User Fields key,
then touch an available field on the side of the display.
2. Touch the Data, Function, or Page tab to display a list
of available selections. A list of information types will be
displayed.
Figure 15-50 Map Data Field Type Selections
3. Touch the Up or Down keys or touch the display and drag
your finger to scroll through the list. Touch the desired item
to select it or touch the Back key to cancel selection.
Garmin GTN 625/635/650 Pilot's Guide
Touch to Select Data Type
Touch to Restore Defaults
Field Type List. Touch To
Select Data Field
Slider Indicates More
Selections Available. Press
Finger and Slide To View
More Selections.
190-01004-03 Rev. K