Garmin GTN 625 Pilot's Manual page 247

En Route, Standard, or Terminal Shield Type
1. While viewing the TCAD Control menu, touch the Shield Type
key and touch the desired Shield Type: Enroute, Standard, or
Terminal.
Touch To Select
Shield Type:
Approach or
Standard
Touch To Manually
Set Shield Height
Figure 9-29 TCAD 9900B Shield Setup for En Route, Standard, and Terminal
2. Touch the Shield Height key and use the keypad to select
the Shield Height value. The selected value will be shown in
the Shield Range key.
3. Touch the Shield Range key and use the keypad to select
the Shield Range value. The selected value will be shown in
the Shield Range key.
9.7.3.3 Approach Mode
1. While viewing the TCAD Control menu, touch the Approach
key to activate Approach Mode TCAD traffic.
2. Touching the Approach key toggles Approach Mode between
Set, Armed, or Active.
190-01004-03 Rev. K Garmin GTN 625/635/650 Pilot's Guide
Touch To Shield Range
9-33
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index