Garmin GTN 625 Pilot's Manual page 502

Hide thumbs Also See for GTN 625:
Table of Contents

Advertisement

Message
Foreword
REMOTE KEY
Getting
STUCK -
Started
Remote OBS key is
Audio &
stuck.
Xpdr Ctrl
Com/Nav
FPL
REMOTE KEY
STUCK -
Direct-To
RP Mode key is
Proc
stuck.
Wpt Info
Map
REMOTE KEY
STUCK -
Traffic
TAWS inhibit key is
Terrain
stuck.
Weather
Nearest
SELECT
Services/
FREQUENCY -
Music
Select appropriate
Utilities
NAV frequency for
approach.
System
SET COURSE -
Set course on CDI/
Messages
HSI to [current
DTK].
Symbols
Appendix
Index
16-18
Description
The remote OBS (OBS
MODE SEL) key/switch
has been in pressed
position for at least 30
seconds. This input will
now be ignored. This
input is not available in
all installations.
The remote RP MODE
key/switch has been
in pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
The TAWS INHIBIT
discrete input has been
in pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
Correct NAV frequency
is not set in the active
NAV frequency for the
approach procedure.
The selected course
on the CDI/HSI does
not match the current
desired track.
Garmin GTN 625/635/650 Pilot's Guide
Action
Verify the OBS MODE SEL key/
switch is not stuck. Contact dealer
for service if this message persists.
Verify the RP MODE key/switch
is not stuck. Contact dealer for
service if this message persists.
Verify the TAWS INHIBIT key/switch
is not stuck. Contact dealer for
service if this message persists.
Insert the correct frequency into
the active navigation frequency
window.
Set the CDI/HSI selected course to
the current desired track.
190-01004-03 Rev. K

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gtn 635Gtn 650

Table of Contents