Garmin GTN 625 Pilot's Manual page 139

3. Touch the Approach key on the Procedures-Approach page
and then touch the key for the desired approach.
4. After selecting the approach for the destination airport, the
approach overview will be displayed.
Touch To Select
Airport
Touch To Select
Transition
Touch To Preview
Approach
5. Touch the Transition key and then touch the key for the desired
transition. The selected Transition will be shown in white on
the Procedure page Approach diagram. Unselected Transitions
will be shown in grey.
Selected
Transition
6. If desired, touch the Channel/ID key, then use the numeric
keypad to select the channel number, and then touch the Enter
key. The Channel and ID are typically loaded automatically if
they are present.
190-01004-03 Rev. K
Figure 6-17 Selecting an Approach from the List
Touch To Load Approach
Figure 6-18 Selected Approach Overview
Figure 6-19 Select Approach Transition
Garmin GTN 625/635/650 Pilot's Guide
Touch To Select Approach
Touch To Select
Approach
Touch To Select
Channel/ID
Touch To Activate
Approach
Drag Finger On
List To View List Or
Touch Up/Down
Keys To Scroll List
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
6-9