Garmin GTN 625 Pilot's Manual page 140

NOTE: As an alternate means of loading an approach, the
Foreword
Channel ID key allows you to select the channel ID for a SBAS
approach for the current destination. The channel ID for the
Getting
Started
SBAS approach is available from an approved approach chart.
Audio &
Xpdr Ctrl
If duplicate numbers are available for a channel, a list will be available
where you may select the desired approach.
Com/Nav
FPL
Sequence List
Direct-To
For The Selected
Transition
Proc
Approach
Diagram
Wpt Info
Map
Traffic
Terrain
NOTE: In software version 6.00 and later, if you build your flight plan with
Weather
the destination airport at the end and then load an approach procedure, the
destination airport will be removed from the end of the flight plan. If the
Nearest
leg to the destination airport is the active leg when loading an approach
procedure, you will navigate all the way to the destination airport before
Services/
joining the procedure. Be sure when LOADING and not ACTIVATING an
Music
approach procedure that the route to be flown is correct.
Utilities
NOTE: In software version 5.13 and earlier, if you build your flight plan with
the destination airport at the end and then load an approach procedure,
System
you will navigate all the way to the destination airport before joining the
procedure. Be sure when LOADING and not ACTIVATING an approach
Messages
procedure that the route to be flown is correct.
Symbols
Appendix
Index
6-10
7. Touch the Preview key.
Figure 6-20 Selected Approach Preview
8. Touch the Load Approach key. The Active Flight Plan page
will be displayed. The approach waypoints are placed at the
end of the flight plan and the unit will automatically sequence
to them after the en route waypoints.
9. Touch the Load APPR & Activate key, which makes the active
leg Direct-To the selected transition waypoint, or for Vector
approaches to activate a leg that is an extended final approach
course. You can also "activate" the selected procedure on the
Procedures page, if the approach is not activated on this page.
Garmin GTN 625/635/650 Pilot's Guide
Unselected
Transition
Selected
Transition
Touch To
Activate
Approach
190-01004-03 Rev. K