Garmin GTN 625 Pilot's Manual page 136

6.3
Foreword
A Standard Terminal Arrival (STAR) can be loaded at any airport with
a published arrival procedure. Only one arrival can be loaded at a time in a
Getting
Started
flight plan. If an arrival is loaded when another arrival is already in the active
Audio &
flight plan, the new arrival replaces the previous arrival. The route is defined by
Xpdr Ctrl
selection of an arrival, the transition waypoint, and a runway.
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Touch To Select
Airport
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
6-6
Selecting an Arrival
1. Touch the PROC key on the Home page to display the
Procedures page and then touch the Arrival key to display
the Arrival page.
Figure 6-8 Procedure Page
2. If necessary, touch the Airport key to select a new airport.
Touch the Arrival key to display the Arrival list for the selected
airport.
Figure 6-9 Arrival Page
3. Touch the desired Arrival from the Arrival list for the selected
airport.
Figure 6-10 Select from Arrival List
Garmin GTN 625/635/650 Pilot's Guide
Touch To Display
Arrival Page
Touch To Display
Arrival List For The
Selected Airport
Touch To Select
Arrival
190-01004-03 Rev. K