Gtn-Gns Crossfilling - Garmin GTN 625 Pilot's Manual

15.4.5.2

GTN-GNS Crossfilling

NOTE: When the active flight plan on the GTN contains legs or features
that are not supported by the GNS, those legs will not be crossfilled and
will not be present in the active flight plan on the GNS.
• GTN to GNS – Active flight plans, active direct-to, User waypoints
• GNS to GTN – User waypoints
1. While viewing the System Setup page, touch the GNS Crossfill
Settings key to reach the GNS Crossfill settings.
2. Touch Auto GNS Crossfill to enable Crossfill and send the
Active Flight Plans and the active Direct-To course to the GNS
unit.
3. Touch the Transfer User Waypoints key to transfer the User
Waypoints from the GTN unit to the connected GNS unit.
190-01004-03 Rev. K
Figure 15-44 GTN-GNS Crossfill Selection
Figure 15-45 GTN-GNS Crossfill
Garmin GTN 625/635/650 Pilot's Guide
Touch OK to Enable Auto
Crossfill With Dual Units
Touch OK to Manually
Transfer User Waypoints
Transfer Of User
Waypoints In Progress
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15-33