Ground Mode - Garmin GTN 625 Pilot's Manual

9.6.3.3 Baro
1. While viewing the TCAD Control menu, touch the BARO key
to manually select the barometric pressure.
2. Use the keypad to select the barometric pressure value.
3. Touch the Enter key to accept the selected value. The selected
value will be shown in the BARO key.
9.6.3.4 Operate
1. While viewing the TCAD Control menu, touch the Operate
key to activate TCAD traffic.
2. Touching the Operate key toggles TCAD traffic operation on
and off.
9.6.3.5

Ground Mode

1. While viewing the TCAD Control menu, touch the Ground
key to activate Ground Mode TCAD traffic.
2. Touching the Ground key toggles Ground Mode on and off.
9.6.3.6 Approach Mode
1. While viewing the TCAD Control menu, touch the Approach
key to activate Approach Mode TCAD traffic.
2. Touching the Approach key toggles Approach Mode on and
off.
190-01004-03 Rev. K Garmin GTN 625/635/650 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
9-29