Measuring Lengths - Renishaw T101 Installation Manual

Measuring lengths

Dimensions and tolerances in mm
1.5 (Clip/clamp mounting) RSLM
1.6 (Clip/clamp mounting) RELM
1.7 (Adhesive mounting) RSLM
1.8 (Adhesive mounting) RELM
Measuring length, ML = (L-25) with dual 10 mm limits 17.5
ML = (L-10) without limits
5 5
0.05 F
F = axis of motion
Ra 3.2
2.1 ±0.15
7.8
Optical centreline Limit sensor position
(incremental and reference mark)
TONiC RSLM/RELM installation guide 4