Table of Contents
Advertisement
14 www.aeg.com
– When the heating function or pro-
– When the appliance is off, you can
7. CLOCK FUNCTIONS
Symbol
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
Setting the clock functions
1.
2.
3.
4.
DeluxeAppliances - EUappliances.com
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
use the heat to keep food warm.
The display shows the remaining
temperature.
Function
Minute Minder
Duration
End Time
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
process until the time ends (3 -
20 minutes).
Set a heating function.
Press
again and again until the
display shows the necessary clock
function and the related symbol.
Press
or
to set the necessary
time. Press OK to confirm. When the
time ends, an acoustic signal
sounds. The appliance deactivates.
The display shows a message.
Press a sensor field to stop the sig-
nal.
• Cooking with the lamp off - touch
and hold
vate the lamp during cooking.
• When you use the Moist Fan Baking
function, the lamp deactivates after 30
seconds. The lamp activates again
when you touch
when you open the appliance door.
• Eco functions - refer to section "Heat-
ing Functions" (for selected models
only).
Description
To set a countdown (max. 2 h 30 min). This func-
tion has no effect on the operation of the appli-
ance. Use
to activate the function. Press
to set the minutes and OK to start.
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
To set the switch-off time for a heating function
(max. 23 h 59 min).
• With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time, if you want to automat-
ically activate and deactivate the ap-
pliance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration
and End Time functions do not work.
7.1 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate the
function in the Basic Settings menu.
• Conditions for the function:
for 3 seconds to deacti-
for 3 seconds or
Useful information:
or
Advertisement
Table of Contents
