Advertisement
Thank you for purchasing your HobbyKing Mini SkyHunter FPV plane. We hope you
enjoy assembling and flying it as we did creating it. A mini sized FPV plane designed for
short to mid range flying.
The large fuselage bay accomodates from small to larger battery packs, plus a under
wing plywood tray can be used to mount flight controllers, OSD, or other equipment.
Recesses molded into the wings allow you to mount sensitive FPV equipment far away
from radio equipment.
HobbyKing aircraft follow an extensive design, development, and testing process to
bring reliable and user friendly products to the masses. They undergo extensive quality
control checks at the factory.
Please read this instruction manual thoroughly before assembling and flying this model.
It is not a toy and if mistreated has the potential to inflict bodily injury or damage
property. It is your responsibility to complete final assembly, setup, and routine pre-flight
checks. Always make sure to check for any loose screws or parts, and that the airframe
is free from damage that may cause failure in flight. HobbyKing is not responsible for
any injury or property damage inflicted due to negligence in assembly or maintenance.
Warnings
Select your flying area carefully. Always choose an open space that is unobstructed
from trees, buildings, and away from crowded areas. Avoid flying in areas with roads,
electric or telephone wires, or close proximity to full size air traffic.
Do not fly this model in poor weather including high winds, low visibility, rain, or
thunderstorms.
Never attempt to catch this model whilst in flight. Even a slow moving model can
cause harm to yourself or others.
This model is recommended for children no younger than 14 years old. All children
should always be supervised by a capable and responsible adult when operating this
model.
Always unplug your model battery when not in use. Do not leave the battery installed
in the model when not in use.
Remain clear from the propeller at all times when the flight battery is connected. A
spinnging propeller can cause bodily injury.
Before flying always turn ON your transmitter first, then connect your flight battery to
the model.
After flying, always disconnect your flight battery first, then turn OFF your transmitter.
Always exercise caution when charging batteries. Follow the recommended charging
instructions from your battery manufacturer, and use a charger with charging parame-
ters that match your battery type.
1
Tools Required
1
2
3
4
5
6
7
8
9
10
11
12
13
Ruler
Hobby Knife
Phillips Screwdriver
Pliers
Required Items
4+ Channel Transmitter + Receiver
3S 11.1V 2200~4200mAh LiPo
30Amp Brushless ESC
8x4 Propeller
14
15
16
17
18
19
Clear Tape
2.5mm Hex Driver
FOAM
Thread
Lock
Glue
Removable Strength
Thread Lock
Foam Glue
(Removable Stength)
Turnigy Charger
MAIN MENU
DECREASE
STOP
STATUS
2212 1400kv Motor
LiPo Charger
3* 9g Servos
2* 5g Servos (Optional)
2 CELL
3 CELL
4 CELL
5 CELL
6 CELL
INCREASE
START
ENTER
Advertisement
