Gain Access To The Settings; About Settings - Cisco TelePresence SX10 User Manual
Ce9.5
Hide thumbs
Also See for TelePresence SX10:
- Administrator's manual (216 pages) ,
- Reference manual (188 pages) ,
- User manual (38 pages)
Table of Contents
Advertisement
Settings
Gain Access to the Settings
1
To gain access to the Settings menu,
navigate to the upper left corner of the
screen and press OK on the remote
control. Then navigate down to System
Information (number two from the
bottom of the menu) and press OK
again.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
The Settings shows basic information about the system as well as providing access to the
Setup Wizard and the ability to force a restart of the system.
About Settings
The System information page
provides information on IP address,
MAC address, SIP Proxy, software
version installed and device name.
The system can be restarted from
here and setup wizard is available
via Advanced settings.
You may now specify ringtone and
volume from this menu.
36
Advertisement
Table of Contents
