Intercom Barge - Cisco C926 User Manual

Intercom Barge

If this option is enabled, when there is an active call and an incoming intercom call arrives, the previous call will be put on hold and the intercom
call will be answered
1. Click the Setting Preference
2. Set On or Off for Intercom Barge.
3. Click for the setting.
Note:
This feature is not available on all servers. For more information, contact your system administrator.
DTMF
When the key is configured as DTMF key, you are allowed to send out the desired DTMF number during the conversation.
To use this feature, you should sure that the DTMF Tone is on.
To configure the DTMF via Web interface
1. Click Setting Preference
2. Select On for Keypad DTMF Tone.
3. Click to save the configuration.
To configure the DTMF via Phone interface
1. Press Menu Features Function Keys Line Keys as Function Keys Line Key2(for example)
2. Press and key to select the DTMF in the Type field.
3. Enter the value with the Desired DTMF number
4. Press or Save soft key to save the configuration
To configure the DTMF via Web interface
1. Click Function Keys Line Key.
2. Select the desired Line Key and select DTMF in the Type.
3. Fill the value with the Desired DTMF number.
4. Click the
Prefix
If the key is configured as Prefix key, you can set the number prefix (e.g. Before the number plus 9), then you don't input 9, press the key and 9
will display on the LCD interface.
To configure the Prefix via Phone interface
1. Press Menu Features Function Keys Line Keys as Function Keys Line Key2(for example)
2. Press and key to select the Prefix in the Type field.
3. Enter the value with number that you want to set as prefix
4. Press or Save soft key to save the configuration
To configure the Prefix via Web interface
1. Click Function Keys Line Key.
to save the configuration.