Table of Contents
Advertisement
LogicStudio
Signals List
Clicking the Signals button shows a screen containing a list of all signals to be rendered on the waveform display.
The Signal listing looks like the following:
The Signals list allows you to conveniently configure all the signals at the same time. Each row represents a
single signal. Inside a single row, you can modify the signal Type, Name, Color, and Source Channel(s), along
with additional options depending on the signal Type selected.
Supported signal Types include Digital Line, Digital Bus, Digital Wave, Analog Channel, and I2C/SPI/UART
Decodes.
Buttons at the top of the Signals list window allow you to add, delete, and reorder the list.
Note: Making any modifications to the Signals List or the Signal Setup in any way (even adding new signals)
immediately affects currently displayed acquisition data on the Waveform Display Area without requiring a
refresh from the device(s).
23
918291 RevA
Advertisement
Table of Contents
