Getting Started Manual
Persistence
Directly above the run mode buttons on the dashboard are the Persistence controls. Click the Persist button to
toggle the function on/off. When persistence is on, subsequent acquisitions are received and shown on the
waveform display. Use the Clear button to remove the waveforms from the display and restart your
acquisitions.
Note: The Clear button also clears your RearView history.
Status Display
At times an animated status display appears in the upper‐right corner of the dashboard (above the Persistence
and Clear controls). This display provides messages when certain device actions are taking a longer period of
time.
For example, the Status Display indicates when the software is waiting for a trigger to occur, accumulating a
large pre/post‐store, or downloading data from an oscilloscope.
Signals Control Panel
The signals control panel is located on the main window to the left of the waveform display area as follows.
Controls on this panel allow for quick and easy signal display modifications.
Note: Signals contain icons indicating the waveform type they are configured to display.
18
918291 RevA