LogicStudio
Scale and Grid
A timescale is displayed along the top edge of the waveform display area at all times. The scale steps and labels
dynamically adjust based on the current timeframe shown. Labeled tick marks have dashed grid lines extending
the full height of the display providing waveform reference.
Interacting with Cursors
Cursors are easily applied to the waveform display area (see The Cursors Tool topic for more information).
Tools
Controls for LogicStudio's built in Tools are located in the space above the Waveform Display Area. The built in
tools include controls for Cursors, RearView, and Magnifier, respectively.
Toggle the Cursors and Magnifier tools (RearView is always on) on or off by clicking the main portion of the
control (containing the icon). Click the right side of the control to access detailed controls related to each tool.
The Cursors Tool
This topic demonstrates the use of the Cursors tool.
When the Cursor tool is enabled, you are currently armed with the selected cursor pair on the waveform
display. When expanded, the tool's detailed control provides storage for up to 4 cursor pairs. When cursors are
placed on the display, they are highlighted when the pair is selected from the numbered cursor pair. Remove a
pair by clicking the Remove Cursor button on the right side of the numbered cursor pair.
Cursors are controlled and interacted with in the following ways:
•
Selecting a cursor pair button activates the pair.
•
Pressing the Remove Cursor button for the pair deletes them from the display.
•
Double‐clicking a cursor pair button automatically zooms and centers the pair on the Waveform Display
Area.
Mark cursor pairs on signals in the waveform display using the following steps:
1. Select a cursor pair (1‐4) from the tools detailed control.
2. Left ‐click the display to place cursor A (of the pair) at the first location.
3. Now, right‐click the display to place cursor B (of the pair) at the second location.
13
918291 RevA