Table of Contents
Advertisement
Getting Started Manual
Magnifier
The Magnifier tool allows you to quickly zoom‐in on a selected time‐period of your acquisition without having to
adjust your main display or lose your frame of reference.
Enable the magnifier tool at any time by clicking the main portion of the control. Now, move your mouse
anywhere over the waveform display and an additional, time‐magnified display is drawn inside a boxed,
magnified area. Use the slider control or mousewheel to adjust the magnification factor inside the time‐
magnified display. The slider bar updates along with your mousewheel adjustments.
With the magnifier tool enabled, you can still adjust the timeframe of the main waveform display by holding the
Control key down while scrolling the mousewheel, or dragging with the left and right mouse buttons as normal.
Tip: This tool conveniently provides a quick, magnified view of closely aligned edges or visibility of decode and
bus value text.
WorldView
The WorldView is an extremely powerful control just above the waveform display on the dashboard. Not only
does it provide important high‐level waveform information, but it also allows for display configuration and even
pre/post‐store settings. The control looks like the following:
The WorldView is primarily a high‐level presentation of the current relationship between your displayed
acquisition(s) and your current view in the main waveforms display.
16
918291 RevA
Advertisement
Table of Contents
