Table of Contents
Advertisement
Cleaning and maintenance
Cleaning the condenser
Important! When the CONDENSER (WÄR-
1
METAUSCHER) display lights, it is essential
to clean the condenser. Otherwise your dryer
might suffer damage. In addition energy con-
sumption will be increased if the condenser
unit is covered with fluff.
Cleaning the filter area
1
Important! A small amount of fluff may
reach the area around the filter in spite of the
fluff filter. Therefore you should clean the
entire filter area from time to time, or at least
every three months.
1. Remove the fluff filter.
2. Hold the filter lid by the top and pull it forwards
until it is released from both holders.
3. Remove the fluff from the entire filter area – pref-
erably with a vacuum cleaner.
4. Press both pins of the filter lid into the holders on
the door until they click in.
5. Reinsert the fluff filter.
6. Press against the filter lid until it clicks into the
lock.
Cleaning the drum
Warning! Do not clean the stainless steel
1
drum with abrasive detergents or steel wool!
Fabric softeners or lime in the water can cause
a scarcely visible deposit to form on the drum.
The dryer is then no longer reliably able to
recognise how dry the washing is. When the
washing is removed from the dryer it will be
damper than you expect.
Cleaning the panel and operating parts
Warning
! Do not use household furniture
1
polish or aggressive detergents.
Cleaning the door seal
1. Rub the door seal with a damp cloth immediately
after the drying procedure.
18
For information on cleaning the condenser see sec-
tion "Cleaning and maintenance, cleaning the con-
denser".
1. Wipe the inside of the drum and the drum fins with
white vinegar to avoid a build up of residues/
deposits effecting the sensors. This is particularly
important if you regulary use fabric conditioning
sheets or dry starched items in the dryer.
1. Wipe over the panel and operating parts with a
damp cloth.
Only use warm water.
Advertisement
Table of Contents
