Assembly - Pelgrim 955 ONY User Manual

Assembly

Left- or right-hinged oven door
Remove the protective frame by removing
screws 1 and 2 (see fig. 9). Remove the frame
and replace screws.
Remove the upper hinge by removing the two
screws. Lift the door from the lower hinge
(see fig. 9a).
Re-fasten the hinge to the door.
Turn the door around so that the handle is on
the other side.
1
2
fig. 9a
Remove the hinge that is now at the top (see
fig. 9b). Attention: the ring belongs in the
lower hinge.
Slide the door into the lower hinge. Place the
ring between the hinge and the hinge holder
fig. 9
(see fig. 9c).
Now reassemble the upper hinge.
Assemble the protective frame on the other
side of the oven.
Unscrew the catch pin of the door lock and
move it to the other side.
fig. 9b
fig. 9c