Electronic Timer - Pelgrim 955 ONY User Manual

Built-in-oven
Table of Contents

Advertisement

Available languages

Available languages

Electronic timer

1 2
After the appliance has been connected, or
when the power supply has been interrupted, the
display will show '12.00'. LED 4 is blinking (see
fig. 5). The time of day can be set.
Setting the time of day
Press key
or
until the correct time has
been reached. The set time will be stored in
the memory after 5 seconds. The LED goes
out.
Minute minder
Press 'SET' until LED 1 blinks (see fig. 5).
Press key
or
minder time has been reached. The set time
will stay on the display. LED 1 lights up
steadily (see fig. 5).
The oven will give a signal when the minute
minder time has lapsed.
Setting the preparation time
Press 'SET' until LED 2 blinks (see fig. 5).
Press key
or
preparation time has been reached. The set
time will be stored in the memory after
5 seconds. LED 2 goes out. The time of day
will be displayed.
3 4
until the correct minute
until the correct
The oven gives a signal when the preparation
time has lapsed and automatically switches
off. LED 2 is on. Press the key
the signal.
Setting the end time
Press 'SET' until LED 3 blinks (see fig. 5).
fig. 5
Press key
has been reached. The set time will be
stored in the memory after 5 seconds. LED 3
lights up steadily. The time of day will be
displayed.
The oven gives a signal when the end time
has lapsed and automatically switches off.
LED 3 blinks. Press the key
the signal.
Switching on and off automatically
You can enter the preparation time and the end
time at which the dish must be ready. Then the
oven switches on and off automatically.
First set the preparation time (see setting the
preparation time) and then the end time (see
setting the end time).
LEDs 2 and 3 light up steadily (see fig. 5). The
time of day will be displayed. The oven gives a
signal when the set time has been reached and
automatically switches off.
Press the key
With the 'SET' key you can check the set values
during the process and adjust them, if
necessary.
or
or
until the correct end time
or
or
to stop the signal.
to stop
to stop

Advertisement

Table of Contents
loading

Table of Contents