Configuring Basic Hgmp Functions; Establishing The Configuration Task; Configuring Ndp - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management

3.3 Configuring Basic HGMP Functions

This section describes how to configure basic HGMP functions to create or manage a cluster.

3.3.1 Establishing the Configuration Task

Before configuring basic HGMP functions, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
When you need to create or manage a cluster, you can configure the cluster with basic HGMP
functions.
Pre-configuration Tasks
Before configuring basic HGMP functions, complete the following tasks:
l
l
Data Preparation
To configure basic HGMP functions, you need the following data.
No.
1
2
3
4
5
6

3.3.2 Configuring NDP

This part describes how to configure the Neighbor Discovery Protocol (NDP) to collect
information about directly connected neighbors.
Issue 01 (2011-07-15)
Ensuring that the device is correctly powered on and operates normally
Configuring basic attributes of interfaces on the device
Data
Range of private IP addresses used in the cluster
Cluster name
Medium access control (MAC) address of the member switch
(Optional) Aging time of NDP packets and interval for sending NDP packets
(Optional) Range of topology collection, hop delay and interface delay in forwarding
NTDP topology request packets, interval for topology collection
(Optional) ID of the management VLAN, aging time of NDP packets, interval for
sending handshake packets, address of the SNMP host, and IP addresses of the FTP
server and the SFTP server
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 HGMP Configuration
86