Huawei Quidway S2700 Series Configuration Manual page 325

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Configure reachable routes between Switch A and Switch B, between Switch A and Switch C,
and between Switch B and Switch C. The configuration details are not mentioned here.
Step 2 Create an NQA traceroute test on Switch A and set the destination IP address to 10.2.1.2.
<SwitchA> system-view
[SwitchA] nqa test-instance admin trace
[SwitchA-nqa-admin-trace] test-type trace
[SwitchA-nqa-admin-trace] destination-address ipv4 10.2.1.2
Step 3 Perform the test.
[SwitchA-nqa-admin-trace] start now
Step 4 Verify the test result.
# Verify the NQA test result on Switch A.
[SwitchA-nqa-admin-trace] display nqa results test-instance admin trace
NQA entry(admin, trace) :testflag is inactive ,testtype is trace
1 . Test 1 result
----End
Issue 01 (2011-07-15)
Configure Switch A as the NQA client.
Create and perform the traceroute test on Switch A to check the statistics on each hop from
Switch A to Switch C.
Destination address for the traceroute test
The test is finished
Completion:success
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Drop operation number:0
Last good path Time:2006-8-5 14:38:58.5
1 . Hop 1
Send operation times: 3
Min/Max/Average Completion Time: 46/47/41
Sum/Square-Sum Completion Time: 125/5349
RTD OverThresholds number: 0
Last Good Probe Time: 2006-8-5 14:38:58.3
Destination ip address:10.1.1.2
Lost packet ratio: 0 %
2 . Hop 2
Send operation times: 3
Min/Max/Average Completion Time: 31/79/62
Sum/Square-Sum Completion Time: 188/13286
RTD OverThresholds number: 0
Last Good Probe Time: 2006-8-5 14:38:58.5
Destination ip address:10.2.1.2
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Attempts number:1
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Receive response times: 3
Receive response times: 3
6 NQA Configuration
315