Huawei Quidway S2700 Series Configuration Manual page 106

Hide thumbs Also See for Quidway S2700 Series:
Table of Contents

Advertisement

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management
If the NDP neighbor is normally established, you can run the display ndp interface command
to check information about the MAC address of the neighboring station and the number of the
interface on the neighboring station that is connected to the local interface.
<Quidway> display ndp interface gigabitethernet 0/0/1
Interface: GigabitEthernet0/0/1
If the NTDP neighbor is normally established, you can run the display ntdp command to check
the NTDP settings.
<Quidway> display ntdp
Network topology discovery protocol is enabled
Hops
Timer
Hop Delay : 200 ms
Port Delay: 20 ms
Total time for last collection:462ms
If device information is successfully collected through NTDP, you can run the display ntdp
device-list [ verbose ] command to view information lists of all the devices.
<Quidway> display ntdp device-list
The device-list of NTDP:
------------------------------------------------------------------------------
MAC
------------------------------------------------------------------------------
0004-0004-0004
0003-0003-0003
0002-0002-0002
0001-0001-0001
If the cluster is established successfully, you can run the display cluster command to view
information about the HGMP cluster to which the device belongs, such as the cluster name and
ID of the management VLAN.
<HUAWEI_0.Quidway> display cluster
Cluster name:"HUAWEI"
Role:Administrator switch
management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 sec
Handshake hold-time:60 sec
IP pool:10.1.1.1/24
No logging host configured
No SNMP host configured
No FTP server configured
No SFTP server configured
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 2 member(s) in the cluster, and 0 of them are down.
If the cluster is established successfully, you can run the display cluster candidates command
to view information about candidate switches, such as the MAC address and device type.
Issue 01 (2011-07-15)
Status: Enabled, Packets Sent: 116, Packets Received: 110, Packets Error: 0
Neighbor 1:
Aging Time: 174(s)
MAC Address : 0018-8203-39d8
Port Name
: GigabitEthernet0/0/1
Software Version: VRP 5.70 V100R006C00
Device Name : S2700
Port Duplex : FULL
Product Ver : S2700
: 3
: 10 min
HOP
IP
2
1
1
0
: 10
: disabled
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PLATFORM
S2700
S2700
S2700
S2700
3 HGMP Configuration
96

Advertisement

Table of Contents
loading

Table of Contents