Huawei Quidway S2700 Series Configuration Manual page 120

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management
Figure 3-3 Networking diagram of configuring basic HGMP functions for a cluster
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Issue 01 (2011-07-15)
NOTE
For convenience, only four devices in the Layer 2 network are described.
FTP Server
2.0.0.1/8
2.0.0.2/8
Ethernet0/0/1
1.0.0.2/8
Ethernet0/0/1
Ethernet0/0/1
Member-1
Ethernet0/0/2
Ethernet0/0/1
Member-3
MAC address
0001-0001-0001
0003-0003-0003
Create a management VLAN on all devices. Enable NDP and NTDP to ensure that each
device can detect the topology structure of the network through NTDP.
Choose the administrator switch, and then create a cluster named HUAWEI on the
administrator switch.
Add all the devices that support HGMP in the Layer 2 network to the cluster.
Assign an IP address to VLANIF 10 to facilitate the communication between member
switches in the cluster and devices out of the cluster.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
Ethernet0/0/3
Ethernet0/0/2
Administrator-1
10.0.0.1/8
......
Member-2
10.0.0.4/8
Cluster
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
Ethernet0/0/1
Device MAC address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
110