Huawei Quidway S2700 Series Configuration Manual page 199

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management
Figure 3-11 Networking diagram of configuring the configuration synchronization function for
an HGMP cluster
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Issue 01 (2011-07-15)
FTP Server
2.0.0.1/8
2.0.0.2/8
Ethernet0/0/1
1.0.0.2/8
Ethernet0/0/1
Ethernet0/0/1
Member-1
Ethernet0/0/2
Ethernet0/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster according to the steps described in
HGMP Functions for a
3.6.2 Example for Configuring the Interconnection of FTP Servers and Devices in and
out of the HGMP Cluster (in NAT Mode)
NOTE
l Configure the interconnection of FTP servers and devices in and out of the HGMP cluster in
NAT or non-NAT mode. The following takes the configuration in NAT mode as an example.
l If it is not required to synchronize the configuration files of the HGMP cluster by accessing the
FTP server out of the cluster, you can skip this step.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
Ethernet0/0/3
Ethernet0/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
Cluster.
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
Ethernet0/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
3.6.1 Example for Configuring Basic
189