Lenovo ThinkStation P910 User Manual page 92
Hide thumbs
Also See for ThinkStation P910:
- Hardware maintenance manual (244 pages) ,
- Hardware configuration (35 pages) ,
- Configuration manual (49 pages)
Table of Contents
Advertisement
a. Disconnect the eSATA connector or IEEE 1394 connector cable from the system board. See "Parts
on the system board" on page 7.
b. Press the two clips toward each other as shown to pull the eSATA connector or IEEE 1394 connector
out of the flex module.
Figure 40. Removing the eSATA connector or IEEE 1394 connector in the flex module
5. Note the orientation of the eSATA connector or IEEE 1394 connector and route the eSATA connector or
IEEE 1394 connector cable into the cable clip.
6. Place the eSATA connector or IEEE 1394 connector into the metal retainer. Then, insert the eSATA
connector or IEEE 1394 connector into the corresponding slot in the flex module as shown.
Figure 41. Installing the eSATA connector or IEEE 1394 connector in the flex module
80
ThinkStation P910 User Guide
Advertisement
Table of Contents
