Lenovo ThinkStation P910 User Manual page 112

• If your are replacing a failing flex adapter, pivot the tab 1 upward to open the latch 2 inside the
multi-function bracket. Then, grasp the failing flex adapter by its edges and gently pull it out of
the flex adapter slot.
Notes:
– If there is any cable connected to the failing flex adapter, disconnect the cable first.
– The flex adapter might fit tightly into the flex adapter slot. If necessary, alternately move each side
of the adapter a small amount until it is removed from the slot.
1 2
Figure 70. Removing the flex adapter
100
ThinkStation P910 User Guide