Lenovo ThinkStation P910 User Manual page 104

11. Pinch the tab of the mounting stud and press the mounting stud downward. Then, turn the mounting
stud 90-degree clockwise to secure the heat sink to the flex adapter.
Figure 59. Securing the heat sink on the flex adapter
12. Pivot the cover of the flex adapter as shown until you hear a click. The cover is secured in position.
Figure 60. Pivoting the cover of the flex adapter
13. Install the flex adapter into the flex adapter slot. See "Flex adapter" on page 99.
Note: If your computer is installed with only one flex adapter, ensure that you install the flex adapter into
the flex adapter slot 1. See "Parts on the system board" on page 7.
92
ThinkStation P910 User Guide