Card Reader - Lenovo ThinkStation P910 User Manual

6. Slide the new slim optical drive with the plastic clip into the flex module until the slim optical drive
snaps into position.
Figure 31. Installing the slim optical drive in the flex module
7. Position the flex module cover on the flex module. Ensure that the rail guides on the bottom of the flex
module cover engage the rails on the flex module. Then, push the cover to the front of the flex module
until it snaps into position.
Figure 32. Reinstalling the flex module cover
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 130.

Card reader

To install or replace a card reader in the flex module, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 59.
2. Remove the flex module from the front of the computer. See "Device in an optical-drive bay" on page 65.
76
ThinkStation P910 User Guide