Lenovo ThinkStation P910 User Manual page 94

1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 59.
2. Locate the hard-disk-drive bay in which you want to install or replace a storage drive. See "Internal
drives" on page 9.
3. Press the pit on the cover of the hard disk drive bay so that the cover is opened. Then, pull the cover
edge as shown to remove the hard-disk-drive bracket from the hard-disk-drive bay.
Figure 43. Removing the hard-disk-drive bracket
4. Depending on whether you are installing or replacing a storage drive, do one of the following:
• If you are installing a storage drive, go to step 6.
• If you are replacing a storage drive, flex the sides of the bracket to release the four pins
storage drive. Then, remove the storage drive from the bracket.
Figure 44. Removing the storage drive from the bracket
82
ThinkStation P910 User Guide
1
1 from the