Lenovo ThinkStation P910 User Manual page 102

6. The heat sink is secured by a mounting stud. Pinch the tab of the mounting stud and turn the mounting
stud 90-degree counterclockwise to release the heat sink. Then, lift the heat sink off the flex adapter.
Figure 55. Removing the heat sink from the flex adapter
7. Locate the M.2 solid-state drive that you want to replace.
8. The M.2 solid-state drive is secured by a retention latch. Pull the handle of the retention latch outward to
release the M.2 solid-state drive. Then, gently pull the M.2 solid-state drive out of the M.2 slot.
Figure 56. Removing the M.2 solid-state drive
90
ThinkStation P910 User Guide