Lenovo ThinkStation P910 User Manual page 101

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 130.
M.2 solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
To replace an M.2 solid-state drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 59.
2. Lay the computer on its side for easier access to the flex adapter slots.
3. Locate the flex adapter slots. See "Parts on the system board" on page 7.
4. Locate and remove the flex adapter on which you want to install or replace an M.2 solid-state drive. See
"Flex adapter" on page 99.
5. Open the cover of the flex adapter.
Figure 54. Opening the cover of the flex adapter
.
Chapter 7 Installing or replacing hardware
89