3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover
engage the rails on the chassis. Then, pivot the handle
the cover is secured tightly.
Figure 113. Reinstalling the computer cover
4. Place the computer in an upright position.
5. If there is any locking device available, lock the computer cover. See "Locking your computer" on
page 29.
6. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 1.
7. Update the configuration of your computer if necessary. See "Using the Setup Utility program" on
page 35.
8. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping your computer current" on page 26.
1
inward until it snaps into position so that
.
Chapter 7
Installing or replacing hardware
131