Multi-Function Brackets - Lenovo ThinkStation P910 User Manual

4. Slide the front fan assembly into the multi-function bracket until it snaps into position.
Figure 62. Installing the front fan assembly
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 130.

Multi-function brackets

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
Your computer is installed with two multi-function brackets. The brackets are used to secure the front fan
assembly, flex adapters, and full-length PCI Express cards. The bracket installed in the upper position of
the chassis also can be used to secure the power supply assembly.
To remove and reinstall either of the multi-function brackets, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 59.
2. If necessary, remove the direct cooling air baffle for easier operation. See "Direct cooling air baffle"
on page 63.
3. Locate the multi-function bracket you want to remove. See "Computer components" on page 6.
4. If you are replacing the multi-function bracket installed in the upper position of the chassis, remove the
power supply assembly. See "Power supply assembly" on page 96.
5. Remove the front fan assembly in the bracket you want to remove. See "Front fan assembly" on page 93.
6. Lay the computer on its side for easier access to the bracket.
94
ThinkStation P910 User Guide