Lenovo ThinkStation P910 User Manual page 107

7. Hold the handle 1
to remove the bracket.
Figure 63. Removing the multi-function bracket
8. Align the three tabs
tabs into the corresponding holes until the bracket snaps into position.
Figure 64. Reinstalling the multi-function bracket
What to do next:
• To work with another piece of hardware, go to the appropriate section.
and the foot 2 at the same time and pull the bracket to the rear of the chassis
1
1 on the bracket with the corresponding holes in the chassis. Then, insert the three
2
1
Chapter 7
.
Installing or replacing hardware
95