Lenovo ThinkStation P910 User Manual page 90

5. To install a new card reader into the card reader retaining bracket, align the four holes in the card
reader with the corresponding studs on the bracket. Then, press the new card reader downward until
it snaps into position.
Figure 36. Installing the card reader into the card reader retaining bracket
6. Note the orientation of the new card reader and route the card reader cable into the cable clip. Hold
the clip on the card reader retaining bracket. Then, insert the new card reader into the card reader
slot in flex module until it snaps into position.
Figure 37. Installing the card reader in the flex module
78
ThinkStation P910 User Guide