Positioning Anti-Slip Mats; Handover; Final Inspection; Transport To The Customer - Otto Bock discovery tmax Instructions For Use Manual

Handover

b) Adjusting the height
1) Push in the tripod spring (see fig. 44, item 1).
2) Adjust the height of the anti-tipper in the anti-tipper adapter (see fig. 44, item 2).
INFORMATION: The anti-tippers must be no more than 5 cm above the floor.
3) Visually check that the anti-tipper has engaged.
43

6.16 Positioning Anti-Slip Mats

The self-adhesive anti-slip mats are installed on the footrest, footplate or centre footrest according to the needs of
the user.
45
7 Handover

7.1 Final Inspection

A final inspection is required before the product is delivered:
• Are all options installed according to the order form?
• Do the wheels turn easily?
• Is the seating shell/seating system correctly adapted to the user?
• Is the seating centre of gravity adjusted correctly?
• Are the footplates/side panels adjusted correctly?
• Is the wheel adapter mounted with the specified torque?
• Can the quick-release axles be easily removed?
• For pneumatic tyres: is the tyre pressure correct (see the section "Technical Data")?
• Have the wheel locks been adjusted correctly?
• Is the anti-tipper mounted and adjusted correctly?
• Have all screws been properly tightened?

7.2 Transport to the customer

The wheelchair should be transported to the user in disassembled state using the outer packaging.
26 | Ottobock
44
46
discovery tmax