Tieline VIA Quick Start User Manual page 36

36 ViA User Manual v1.2
9. Tap Connect or press the CONNECT
dialing and negotiating, the CAN LED on the front of the unit will flash green; it turns solid
green when connected.
10. Swipe left once to view connection details and Local and Remote line quality. The Local
and Remote line quality displayed for POTS Codec connections is related to the actual
POTS line quality at either end of the link. This reading affects the maximum allowable bit
rate when the codec is training and negotiating a connection. It also indicates the stability
of the connection when a call has been connected for a long period of time. If the line quality
starts drop quite low after being connected for a long period, we recommend you retrain the
connection to improve the line quality and avoid loss of audio.
11. Tap the Statistics
higher connection bit rates by pressing the F2 button and then the NAVIGATE UP
while viewing the Statistics screen; for lower bit rates press the F2 button and then the
NAVIGATE DOWN
12. Tap Disconnect or press the DISCONNECT
button to dial the destination codec. Note: When
button to view connection statistics. Note: Incrementally negotiate
button.
button to hang up the connection.
button
© Tieline Pty. Ltd. 2016