18
ViA User Manual v1.2
6. Tap Destination to connect over an IP LAN (using an automatically assigned DHCP IP
address).
7. Tap Destination to enter the IP address of the codec you are dialing, then tap Accept in the
top right-hand corner of the TOUCH SCREEN.
8. Tap Via to select a specific dialing interface in the Select Via screen, or use the default
Any setting. Tap Save in the top right-hand corner of the screen to dial using the default
Any setting. This setting uses the first available interface based on the following default
priorities.
· Primary = LAN1.
· Secondary = LAN2.
· Tertiary = Wi-Fi.
© Tieline Pty. Ltd. 2016