Part Iii Inserting And Removing Modules - Tieline VIA Quick Start User Manual

3 Inserting and Removing Modules
A single module slot is available on the codec rear panel for inserting an optional ISDN or POTS
module into the codec.
Inserting or Removing a Module
Ensure the codec is not powered up when inserting or removing modules. Where possible
use anti-static precautions to help minimize the chance of static charges damaging the
highly sensitive circuitry. Do not force a module into the codec. Modules should be installed
slowly and gently.
1. Press the POWER
2. Remove the 4 screws from the blanking panel or module installed in the codec.
3. Carefully slide the new module into the module slot and ensure the base of the module remains
flat during insertion, to ensure it lines up correctly with the module connector in the codec.
4. Reinsert the 4 screws to hold the module firmly in place.
5. Press the POWER
6. Press the HOME
7. Tap Transport Interfaces to expand the menu and tap ISDN Module or POTS Module to
configure module settings.
© Tieline Pty. Ltd. 2016
ViA codec with an ISDN module installed
button and tap Shut Down to turn the codec [OFF].
button to power up the codec.
button to return to the Home screen and tap Settings
ViA User Manual v1.2
.
9