Tieline VIA Quick Start User Manual page 20

20 ViA User Manual v1.2
13. Tap Direction if you want to save data and configure the codec to either Encode Only or
Decode Only. Note: this can be helpful if connection bandwidth is limited.
14. Tap to toggle the On/Off button for Auxiliary data to activate CONTROL PORT I/O
operation and RS232 data in the codec.
15. When configuration is complete, tap Continue in the top right-hand corner of the TOUCH
SCREEN and you will be prompted to save the configuration as a program. Tap Direct Dial
in the Save Program dialog to go straight to the Direct Dial Connections screen and
make a connection, or tap Save & Load Program to name and save the program. The new
program will be loaded automatically after it has been saved.
16. Tap Connect or press the CONNECT button to dial the destination codec.
© Tieline Pty. Ltd. 2016