Tieline VIA Quick Start User Manual page 25

When you select a SIP account this will complete configuration. Simply tap Done in the
top right-hand corner of the Destination Settings screen to view the Direct Dial menu
screen.
10. For a peer-to-peer SIP connection select Any as the interface with which to dial if you have
an Ethernet cable connected to LAN1 or LAN2, or tap Save in the top right-hand corner of
the screen if it is already selected. Then tap Done in the top right-hand corner of the
Destination Settings screen to view the Direct Dial menu screen.
Note: by default the codec is configured to use:
· LAN1 with the SIP1 interface if you select Primary in SIP mode, or
· LAN2 with the SIP2 interface if you select Secondary in SIP mode.
If you want to use a different IP interface such as Wi-Fi to dial over SIP, configure this as the
Via setting in either the SIP1 or SIP2 interface.
11. When configuration is complete, tap Continue in the top right-hand corner of the TOUCH
SCREEN and you will be prompted to save the configuration as a program. Tap Direct Dial
in the Save Program dialog to go straight to the Direct Dial Connections screen and
make a connection, or tap Save & Load Program to name and save the program. The new
program will be loaded automatically after it has been saved.
© Tieline Pty. Ltd. 2016
ViA User Manual v1.2 25