Connecting With Isdn - Tieline VIA Quick Start User Manual

28 ViA User Manual v1.2

Connecting with ISDN

6.3
The following procedure will create a custom peer-to-peer ISDN connection program using the
codec's TOUCH SCREEN without using the Toolbox Web-GUI and a computer. Attach an ISDN
cable to the ISDN module installed in your codec. The codec displays ISDN line sync status in the
Status Bar at the top of the TOUCH SCREEN.
Symbol
1 No ISDN
Symbol
2
3
1. Press the HOME
2. Tap Transport to adjust this setting if the current selection is IP.
3. Tap to select ISDN as the preferred connection type.
4. When dialing a Tieline codec tap to select the default Tieline Codecs Session Data setting,
or tap Sessionless if dialing a non-Tieline codec.
Description of Status
No ISDN module is installed in the codec.
An ISDN module is installed in the codec and either:
· No ISDN line is attached to the codec, or
· ISDN line is attached but line sync has not been detected by the
module
An ISDN module is installed in the codec and line sync has been detected.
button to return to the Home screen, then tap Dialer .
© Tieline Pty. Ltd. 2016