Part Iv Wireless Ip Connection Options - Tieline VIA Quick Start User Manual

10 ViA User Manual v1.2
4 Wireless IP Connection Options
The codec has multiple IP interface connection options, including:
1. LAN1 Ethernet port (default Primary Via interface in the Dialer
2. LAN2 Ethernet port (default Secondary Via interface in the Dialer )
3. Internal Wi-Fi (default Tertiary Via interface in the Dialer )
4. External USB PORT 1.
5. External USB PORT 2.
Use the Select Via interfaces screen in the Dialer
establishing a connection. By default Any is selected, which means the first available interface will
be used to dial a connection. To connect over a LAN, attach an Ethernet cable to either LAN1 or
LAN2 on the codec.
Connecting a Wi-Fi Access Point
To connect the codec to a Wi-Fi network access point:
1. Press the HOME
2. Tap to select Transport Interfaces and then tap Wi-Fi
3. Ensure the Wi-Fi State is Enabled and tap Rescan Access Points if the required Wi-Fi
network is not populated in the access point list.
button to return to the Home screen, then tap Settings
)
to choose the interface used when
.
© Tieline Pty. Ltd. 2016
.